!
!

Floating Pump Intake with 2 m Anti Bio-Foul Hose

4000620
Weight: kg
Floating Pump Intake with Anti-Fouling Hose

The Floating Pump Intake includes 2 metres of food grade Anti-Bio-Fouling Hose and floats just below the surface of the water, therefore avoiding taking water from near the sediment at the base of the tank, or from the area of any floating debris at the surface.

Floating Ball Ø 15 cm with two ears.
Material: Polyethylene

Filter basket made of stainless steel Mesh size 1.2 mm

Check Valve 1″ brass
Stainless steel hose clips 

2m Anti Bio-Foul steel reinforced hose

Pump Base & Floating Intake

4000680
Weight: kg
Larger picture
Connects a Floating Intake to a vertical pump.

The pump base fits most vertical pumps which suck in water at the base, and allows it to draw water through the attached floating intake to extract the cleanest possible water from the tank. Fits pumps of 115 mm to 125 mm diameter, and terminates in a 1 m Anti-Bio Fouling Hose with attached floating intake and strainer.

Note : For the pump base only (no floating intake)  see product 6000310B Pump Base Only.

Pump Base with Sealing Gaskets

4000681
Weight: kg
Connects a Floating Intake to a vertical pump.

The pump base fits most vertical pumps which suck in water at the base, and allows a floating intake to be attached to extract the cleanest possible water from the tank. Fits pumps of 115 mm to 125 mm diameter, and terminates in a 1" hose tail.

Note : Does not come with the floating intake shown  -  see product 6000310 Pump Base & Floating Intake.

Pump to Garden Hose Adapter

9000123HR
Weight: kg
Larger picture
Connect any garden hose to your garden pump
The hose reducer connects to any garden pump with a 1" BSP female outlet, and allows you to connect any standard 1/2" garden hose, or a larger 3/4" or 1" hose.

Pump to Tank Connector Kit

9000123PT
Weight: kg
Larger picture

A high quality connector set with quick coupling and shut-off valve.

NOTE - This connector kit connects a garden SteelPump to the side port on the 3P Wall Tank, and other water butts with a 1" or 3/4" threaded port.

The Pump to Tank Kit fits pumps with either a male or female 1" BSP thread. In this way it will fit the majority of garden jet pumps on the market. It can be decoupled quickly from either end, allowing you remove your pump for safe storage without emptying the contents of the water tank. Note this kit fits all SteelPumps except X-AMV series, which have a 1.25" thread.

To fit the 650L (2006) 3P Wall tank you need the 1" version, while the 3/4" version fits the later 750L and 800L models.

Pump to Harcostar Water Butt Connection Kit

9000123PH
Weight: kg
Larger picture

A high quality connector set with quick coupling and shut-off valve. Designed to reach into the recessed lower port of the Harcostar 700litre tank.

NOTE - This connector kit is intended to connect a SteelPump, or iPump to the recessed 3/4" threaded port on Harcostar water butts.

This 1 metre long connection kit uses a sturdy brass valve with a polypropylene threaded connector to avoid the risk of damage to the soft plastic ports on Harcostar water butts/tanks. It allows the pump to be quickly attached or removed without getting wet or losing any water.

Note this kit will not fit the SteelPump X-AMV series.

3/4" Pump to Tank Kit Extra Ball Valve

9000123PT2
Connection Kit Accessorie
An additional ball valve for the pump to Tank 3/4" Connector Set allows the kit to be used on a second rain tank.

Wall Tank Ball Valve 1" Female Thread

9000123BV
Weight: kg
Larger picture
Provides a valve outlet for the side port of the 650L 3P Wall Tank
The valve screws into the side port of the 3P 650L Wall Tank and provides a 1" female thread which can be connected to the Pump to Garden Hose Adapter 9000123HR to connect a garden hose, or to any other hose tail or hose coupling. Ideal for drip irrigation systems or where connection to the normal tap outlet is not possible.

Pump to harcostar connector kit 3/4"

9000123PH
Weight: kg
For Harcostar 700L Tank Only

3P Pump to Tank Connector Kit 3/4"

1" Pump to 1 1/2" BSP Tank Connector Kit

9000123PTIT15
1" Pump to 1 1/2" BSP Tank Connector Kit
The Pump to Tank Kit fits pumps with either a male or female 1" BSP thread. In this way it will fit the majority of garden jet pumps on the market. It can be decoupled quickly from either end, allowing you remove your pump for safe storage without emptying the contents of the water tank.