Connectors & Accessories

Pump to Tank Connection Kit

9000123PT

Weight: kg

Larger picture

A high quality connector set with quick coupling and shut-off valve.

NOTE - This connector kit connects a garden Steel pump to the side port on the 3P Wall Tank, and other water butts with a 1" or 3/4" threaded port.

The pump to tank kit fits pumps with either a male or female 1" BSP thread. In this way it will fit the majority of garden jet pumps on the market. It can be decoupled quickly from either end, allowing you remove your pump for safe storage without emptying the contents of the water tank. Note this kit fits all SteelPumps except X-AMV series, which have a 1.25" thread.

To fit the 650L (2006) 3P Wall tank you need the 1" version, while the 3/4" version fits the later 750L and 800L models.

Pump to Garden Hose Adapter

9000123HR

Weight: kg

Larger picture

Connect any garden hose to your garden pump

The hose reducer connects to any garden pump with a 1" BSP female outlet, and allows you to connect any standard 1/2" garden hose, or a larger 3/4" or 1" hose.

1" Tank Connector Set

9000123

Weight: kg

Larger picture

Connects two 650L 3P Wall Tanks or other water butts together.

This connector set screws into the brass 1" port found on either side of the 650L (2006 model) Wall Tank, any number of Wall Tanks can be connected in this way. This kit also works with any other water butt but you will need to make a hole using the hand auger provided in the kit, and then reach into the butt to secure the backnut.

3P Filter Collector to Wall Tank Long Link Kits

3P Technik

9000123

Weight: kg

Larger picture

For connecting 3P Filter Collector to water butts/tanks

This kit allows you to locate the 3P Filter Collector a distance away from the water tank.

Available with a 50 mm stub, designed to push fit to the 3P Wall Tank, particularly suitable for thin walled tanks.

Available in lengths of

1 metre - 9000123L

2 metre - 9000123L2

5 metre - 9000123L5

Wall Tank Ball Valve 1" Female Thread

9000123BV

Weight: kg

Larger picture

Provides a valve outlet for the side port of the 650L 3P Wall Tank

The valve screws into the side port of the 3P 650L Wall Tank and provides a 1" female thread which can be connected to the Pump to Garden Hose Adapter 9000123HR to connect a garden hose, or to any other hosetail or hose coupling. Ideal for drip irrigation systems or where connection to the normal tap outlet is not possible.

Sight Guage

9000123SG

Weight: kg

Larger picture

Visually check your water level

A sight guage which fits the 3P 750L and 800L wall tanks so you can easily see how much water you have left.

1" to 3/4" Reducing Double Nipple

0710358

Weight: kg

Larger picture

A reducing nipple with a 1" BSP male and 3/4" BSP Female

If used to connect permanently to another brass thread, coat the thread with clear silicone before assembly and tighten, then leave for 1 hour before use.

3/4" Wall Tank Connector Set

9000326

Weight: kg

Larger picture

The 3P Tank Connection enables you to connect any two tanks together with 3/4" female threaded connection points.

Colour - Green

There are no 3/4" backnuts with this kit. Ideal for situations with some water pressure from standing tanks. 25 cm long. This product connects 3P Wall Tanks, Noblesse and Lifestyle Tank (discontinued) which there is one remaining in stock - please visit our Special Offers page.

Utility Tank 2" connector set

9000123CEL

Weight: kg

Connects 2 1500L Utility Tanks.

The 3P Utility Tank connection Kit enables the connection of the 1500L Utility Tanks. 50cm of 2" hose (50 mm) comes with 2 x large hoseclips. Designed to connect onto the 2" connection stubs at the base of the tanks.

1" Backnut

0100566

Weight: kg

Larger picture

A spare 1" bsp plastic backnut

A plastic 1" BSP backnut for use with rainwater diverters or linking kits