!
!

3P Filter Collector to Tank Universal Long Link Kit

9000123
The 3P Universal Long Link Kit enables connection from the 3P Filter Collector to any thin walled water butt or tank. Complete with holesaw, seal and backnut.

Available in lengths of

1 metre - 9000123U

2 metres - 9000123U2

5 metres - 9000123U5

Pump to harcostar connector kit 3/4"

9000123PH
Weight: kg
For Harcostar 700L Tank Only

3P Pump to Tank Connector Kit 3/4"

1" Pump to 1 1/2" BSP Tank Connector Kit

9000123PTIT15
1" Pump to 1 1/2" BSP Tank Connector Kit
The Pump to Tank Kit fits pumps with either a male or female 1" BSP thread. In this way it will fit the majority of garden jet pumps on the market. It can be decoupled quickly from either end, allowing you remove your pump for safe storage without emptying the contents of the water tank.

1" Pump to 2" BSP Tank Connector Kit

9000123PTIT2
3P 1" Pump to 2" BSP Tank Connector Kit
The Pump to Tank Kit fits pumps with either a male or female 1" BSP thread. In this way it will fit the majority of garden jet pumps on the market. It can be decoupled quickly from either end, allowing you remove your pump for safe storage without emptying the contents of the water tank.

3P Lawn Tap Set

9000390
Weight: kg
The set is supplied with 15 metres of hose.

This accessory set allows customers to connect their existing garden hose to a rainwater system at a convenient point in their garden.

The chamber can be buried in a lawn or flower bed, flush to ground level. The set is supplied with 15 metres of hose.

3/4" Pump to Tank Kit Extra Ball Valve

9000123PT2
Connection Kit Accessory
An additional ball valve for the pump to Tank 3/4" Connector Set Allows the kit to be used on a second rain tank.

3/4" Plastic High Flow Tap

7000539
7000539
A standard high capacity plastic water butt tap, with backnut, as supplied with the 3P Wall Tank, and other tanks.

Lockable Tap 1/2"

0401445
A high quality lockable chrome-plated brass tap with removable hose-tail adapter.

Hand Hole - Cutter

9000
Produces the correct size hole for a 3/4" BSP tap or hosetail.
For cutting tap or connector  holes by hand in polythene water butts.

28 mm Flat Bit

9100278
A 28 mm flat drill bit for attaching to an electric drill. For cutting hole in any waterbutt or rain tank to fit a tap at 3/4" BSP.