Connection inlet: 2 x DN 200
Outlet into storage: DN 150
Outlet into sewer: DN 200

Height difference between inlet and outlet 320 mm.

Material Filter corpus: stainless steel

Material Filter sieve: stainless steel

Mesh size: 0.4 x 1 mm

Legs = Thread rods M10 with screw nut made of stainless steel.

Length 250 mm

Weight: 33.2 kg

Connection inlet: 2 x DN 250
Outlet into the storage: DN 150
Outlet into the sewer: DN 250

Height difference between inlet and outlet 320 mm.

Material Filter corpus: stainless steel

Material Filter sieve: stainless steel

Mesh size: 0.4 x 1 mm

Legs = Thread rods M10 with screw nut made of stainless steel.

Length 250 mm

Weight: 39.5 kg

Connection inlet: 2 x DN 250
Outlet into the storage: DN 200
Outlet into the sewer: DN 250

Height difference between inlet and outlet 320 mm.

Material Filter corpus: stainless steel

Material Filter sieve: stainless steel

Mesh size: 0.4 x 1 mm

Legs = Thread rods M10 with screw nut made of stainless steel.

Length 250 mm

Weight: 39.5 kg

The 3P Twin Filter contains 2 VF1 type filter cascade units and can be either installed below ground as an inspection chamber, or can be bolted to a wall in frost protected locations. The Twin Filter contains the same high performance 2 step cleaning system as the VF1 range, ensuring a high level of efficiency at all flow rates.

Max Roof Area 800 m²

Inlets 2 x 110 mm

Outlets (Clean water) 2 x 110 mm

Outlets (Waste) 2 x 110 mm

Height Inlet to Clean Outlet  350 mm

Height Inlet to Waste Outlet  510 mm

Material   Polyethylene (with stainless steel mesh inserts)

Filter Mesh Size 0.65 mm (650 micron)

A high quality corrosion resistant bracket for mounting the 3P Twin Filter to a wall.

The 3P Twin Filter is suitable for below ground, or wall-mounted application.

Connection inlet: DN 150/ DN 200.

Outlet to rainwater tank: DN 150/ DN 200.

Emergency overflow or additional inlet: DN 150/ DN 200.

Connection capacity for roof areas:800 m²/ 1200 m².

Housing material: Polyethylene.

Filter basket material: Polyethylene.

Mesh size: 1 mm.

Diameter: 785 mm. Height: 815 mm.

Weight: 8 kg.

Connection inlet: 2 x DN 150/ DN 200.Outlet to rainwater tank: DN 150/ DN 200.

Emergency overflow or additional inlet: DN 150/ DN 200.

Connection capacity for roof areas up to:800 m²/ 1200 m².

Housing material: Polyethylene.

Material filter basket: Stainless steel.

Mesh size: 0.55 mm.

Diameter: 785 mm.

Height: 815 mm.

Weight: 10 kg.

As this is a Retention Filter, there is a significant risk of colour being generated in to the storage tank- 3P do not recommend use of Retention Filter for any properties where water is re used in buildings.