The 3P Filter-Collector fits in the downpipe where rainwater enters the top and into a filter cartridge. Any leaves and dirt get washed down the downpipe, while the filtered water is diverted to your water tank. The filter cartridge is removable without having to de-mount the whole Filter-Collector, and is largely self cleaning under most conditions.

Once the water tank is full, the Filter-Collector acts as an automatic overflow. It can also be switched off to stop water collection during winter for example.

The Filter-Collector is designed to last, made of impact resistant UV stabilised durable plastic, and is completely frost and weather resistant. There are no moving parts to go wrong and the stainless steel filter mesh will not rust.

The universal adapter rings on the top and bottom allow for round downpipes from 68 mm to 110 mm, and will fit square or any other shaped downpipe from 65 mm upwards to a maximum diameter of 100 mm. The side outlet (cleaned water) is 75 mm (3 inch), with an adapter for 50 mm (2 inch) and 32 mm (1 1/4 inch).

The 3P Filter-Collector fits the 3P Wall Tank without further accessories. For other water butts use the 3P Universal link Kit (up to 300 mm distance) or if connecting the a water butt some distance from the downpipe use a Long Link Kit, the 9000123L provides an end fitting which replaces the 50 mm adapter of the filter collector, and fits sealed water butts without lids such as the 3P Wall Tanks, while the Universal long link kit 9000123U has a thread and nut on the end and is designed for standard butts with lids and is particularly suitable for thin-walled low cost waterbutts.

The 3P Filter Collector is available in four colours

Brown - 2000810

Grey - 2000820

Black- 2000840

White- 2000850

The Filter-Collector is designed to last, made of impact resistant UV stabilised durable plastic, and is completely frost and weather resistant. There are no moving parts to go wrong and the stainless steel filter mesh will not rust.

The 3P Filter Collector can connect directly to some rainwater tanks such as the 3P Wall Tank. The universal link kits is recommended when using the filter collector with waterbutts.

Available in Four colours: 

Brown 2000810U

Grey 2000820U

Black 2000840U

White 2000850U

The Filter Collector with Unversal link kit can also be used with the long link kit that come in different lengths.

The Rainus works uniquely, in the opposite way to most downpipe filters, ejecting the leaves and dirt from the front while clean water continues down the downpipe. This makes the Rainus ideal for keeping soakaways and gulleys clear, and for retro fitting to existing below-ground systems where it would not be practicable to install a below ground filter and associated pipework.

The Rainus fits 100 mm, 80 mm, 68 mm round and and 65 mm square (adapters included).

The Rainus works uniquely, in the opposite way to most downpipe filters, ejecting the leaves and dirt from the front while clean water continues down the downpipe. This makes the Rainus ideal for keeping soakaways and gulleys clear, and for retro fitting to existing below-ground systems where it would not be practicable to install a below ground filter and associated pipework.

The Rainus fits DN 80, DN 90 and DN 100 pipes.

This kit allows you to locate the 3P Filter Collector a distance away from the water tank.

Available with a 50 mm stub, designed to push fit to the 3P Wall Tank,  particularly suitable for thin walled tanks.

Available in lengths of

1 metre - 9000123L

2 metre - 9000123L2

5 metre - 9000123L5

Available in lengths of

1 metre - 9000123U

2 metres - 9000123U2

5 metres - 9000123U5

The Leaf Seperator fits DN 80, 90 and 100 downpipes, and also common UK sizes: 65 mm square and 68 mm round downpipes with the supplied adapters.  The Leaf Separator discharges leaves from the front while allowing rainwater to pass into the downpipe as usual. This product is recommended for houses which experience heavy leaf fall, particularly where rainwater is discharged into a soakaway, which would otherwise block over time and need costly refurbishment. Available in Brown or Grey.

The 3P Leaf Catcher is installed in the downpipe and removes leaves and other which may clog gulleys and soakaways. Leaves are held at the front of the leaf catcher and can be cleaned out by hand at intervals.

The Leaf Catcher fits DN 80, 90 and 100 downpipes, and also common UK sizes 68 mm round and 65 mm square with the supplied adapters.  The Leaf Catcher is available in Brown or Grey.